If you’ve installed track lighting fixtures, you may be wondering “what if LED track lights can’t be dimmed?” Bulbs are much more complicated than incandescent bulbs and are prone to issues like flickering. If you’re having this problem, you should check first to make sure the bulb isn’t the problem. If the bulb itself is faulty, you can replace it with a new bulb.
One of the biggest advantages of track lighting is its flexibility. You can easily adjust its angle. You can simply pull the track header to different positions, or slide it along the track outline to adjust the brightness. You can even rotate it horizontally or vertically, which is handy if you’re lighting up artwork. If you’re looking for a more diffuse lighting effect, you should choose a track light that allows you to do so.
Another common cause of dimming LED lights is improper voltage. If the LEDs inside the bulb get too high voltage, they start to get damaged, causing the output to dim. Bad voltage can also shorten the lifespan of the LED. If you’re not sure how, check out the video below. Keep in mind that the light output will be lower than initially, but it will still be dimmable.
If your LED track lights won’t dim, it’s most likely caused by a controller issue. If your LED strip is not glowing, you should check the wiring connecting the controller to the LED strip. The connector between the controller and the LED strip is very sensitive. The contact surfaces of the strips should be firmly attached. You should also make sure the voltages match between the two devices.
It is important to note that if LED track lights cannot be dimmed, your existing lighting system is not compatible with them. This is because some dimmers don’t work with LED bulbs, and not all controls are designed for low-wattage lamps. If you don’t know what the appropriate type of dimmer is, you can consult a lighting professional or LED manufacturer to determine which LEDs will work in your system.